Once the wires have been exposed, gently tug on each one to confirm if they are securely fastened underneath the screws. Once the outlet has been completely dried, press the reset button and listen for the click noise, which indicates the outlet has been reset and power has been restored. Allow the hairdryer to thoroughly remove the moisture from the area before continuing, as any presence will cause the GFCI reset to be unsuccessful. To remove moisture, try plugging a hairdryer into a different outlet nearby and aim it at the GFCI outlet that has moisture present. If moisture happens to be present in the outlet, it’s crucial to remove all traces of it before resetting the GFCI and attempting to plug anything into it. When it trips, it shuts off and stops electricity through the outlet as a safety measure. If a GFCI outlet senses that there is moisture present in or near the outlet, it will trip as a way to prevent electrocution. If there’s moisture, try drying the outlet thoroughly with a hairdryer plugged into another outlet. If the breaker trips again after this fix, the issue could be a short circuit which can be dangerous and should be addressed by a licensed specialist. Be sure to reset the GFCI outlet as well. To reset it, first flip it to the “off” position, then switch it to the “on” position.
However, if a switch is located in the middle position, that means it has tripped and needs to be reset. The breaker switch should either be flipped to “off” or “on. To determine if a breaker has tripped, look at the buttons inside the breaker box.
Otherwise, check to see if the breaker for the corresponding room has tripped. Check the main electrical panel to see if a blown fuse causes the issue and if so, replace the fuse and reset the GFCI outlet. A GFCI outlet won’t work if a breaker has tripped or if a fuse has blown.
0 kommentar(er)
